Box for toys, part 2

toy boxParallel rollers should be screwed to the bottom of each box. When at the end we will stick portraits of dogs to the fronts of the crates, it is good to put thin, thick strips under the cover 4 mm, to avoid rubbing …

Dutch Garden Windmill Part 3.

windmill 2Cedar wood looks noble and resistant. The lining of the windmill consists of boards arranged on supports like scales and glued to them. The rotating overlay consists of segments cut in the form of an arc, glued to the plate of the smaller base. For oblique front wall …

Dutch garden windmill, part 2.

windmill constructionThe design is the same as years ago
We start the construction of a garden windmill designed by us by assembling the walls of the building. Elements with a height 36 cm in the middle of both walls, cut at an angle 52 steps and glue them in the corners. Created in the corners of the house …

Dutch Garden Windmill Part 1.

garden windmillWindmills are back in fashion. Admittedly, it is more and more difficult to see them in nature, but you can find them more often in gardens. We will discuss in detail the construction of a classic Dutch windmill.

Once upon a time, windmills with huge wings were part of the landscape, especially coastal regions. Today you can rarely get them …

Cabinet with a hanger

Cabinet with a hangerWe admit, that our hanger design for the hall looks a bit strange, nevertheless, it is extremely practical and does not take up much space at all. The hallway furniture we design consists of two elements – from the cabinet body, in which …

A handy cupboard by the washbasin

cupboard by the sink
Top plates and side walls (multiplex, 30 mm) Cut both elements of the washbasin at an angle with a table saw or hand saw.
We mark the shape of the opening for the washbasin. More reliable mounting of the fittings will be ensured by inserting it through the top plate.
Glue the boards together and fix them with clamps. Rectangular piece of tile …

How to make modular boxes

how to make boxesPeople who are not very gifted can relatively easily cope with making several boxes.
Individual boards are cut out of plywood with a table saw. The outer walls are thick 12 mm, bottom 6 mm, cover 15 mm.
We connect individual boards into boxes, gluing them to the forehead …