Program “do it yourself” Adam Słodowy
do it yourself (from English Do it yourself , and abbreviated as DIY) is a definition of an idea related to independent and non-commercial performance, mostly for one's own needs, of various kinds
… Category: Workshop
How to make a workbench?
A workbench made of square timber and battens is perhaps not an example of top elegance, but it is cheap and as stable as a workshop made of ready-made elements. Entire drawers along with the housing can sometimes be found among discarded furniture. Supporting structure made of frames …
Installation of shelves in the workshop
1. First, the height of the top shelf of the rack is determined – accordingly, what are we going to put on it – and marks the highest hole in the wall.
2. According to the spirit level and the rack rail, we determine the position of the upper screw that secures the rail above the shelf.
3. …
Order in the workshop
If the search for the right tool takes more time than just using it, it is time to bring order. Here is a proven system of internal organization of the workshop.
The basis of this system is a set of racks with wall rails equipped with oblong holes. It is a practical equipment of ours …
Table saws for amateurs and professionals
table saw.
All table saws are used for working with wood, wood products and other materials. However, more or less sophisticated models are also observed in this group of devices. The universal table saw is successfully used in the workshop and on the construction site. …
Under-table saws
In the case of the so-called. under the table saws, the operator moves the saw blade with the drive unit under the table (hence the name) using a special handle and adjusts it to the material being processed. Advantage: ease of processing large bulky items, which do not slide, because they are fine …
Table saws
They are not considered hand tools, but stationary – talking about table saws, which are offered in a wide range of different types of models. What a universal saw blade looks like? What is the difference between an ordinary universal circular saw and a special universal circular saw?? What others …
Filling gaps in the floor
When repairing an old plank floor, fill the gaps with wood putty. The work will be facilitated by a template with a longitudinal cut, sliding along the slot. Kit can be easily pressed into it with a putty knife. Such a template should be cut out of thin stainless steel, thick cardboard or plastic. …
Preparation of the base from boards
Preparation of the base from boards
In renovation systems of pouring floor self-leveling compounds, the substrate must be properly prepared. And the substrates are, for example,. old plank floor. In the case of boards, we must first of all remove their keystrokes, sand and prime with a suitable preparation. Then with staples …